Lenovo IdeaPad Tablet K1 Lenovo IdeaPad Tablet K1 Hardware Maintenance Manual - Page 48
Integrated camera, Remove one screw
View all Lenovo IdeaPad Tablet K1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
IdeaPad Tablet K1 Hardware Maintenance Manual 1100 Integrated camera For access, remove these FRUs in order: •• "1010 Base cover" on page 31 •• "1020 Battery pack" on page 33 •• "1030 Middle cover" on page 34 •• "1040 Docking bracket" on page 35 •• "1050 System board" on page 36 •• "1060 Switch board, SD board and HDMI board" on page 38 •• "1070 Speaker" on page 41 •• "1080 Optical finger navigation (OFN) module" on page 42 •• "1090 Panel support bracket" on page 43 Figure 10. Removal steps of integrated camera Note: Remove one screw 1, and then remove the integrated camera from the LCD cover in the direction shown by arrow 2. 1 2 Step 1 Screw (quantity) M4.5 x 3 mm, flat-head, nylon-coated (1) Color Silver Torque 1.5-2.0 kg/cm When installing: Stick the integrated camera to the top center of the LCD cover and ajust the placement of it to make sure the connector is attached firmly. 44