Lenovo IdeaPad Y560 Lenovo IdeaPad Y560 Hardware Maintenance Manual V2.0 - Page 48
Removal steps of fan assembly and heat sink assembly continued, Loosen two screws
View all Lenovo IdeaPad Y560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
IdeaPad Y560 Hardware Maintenance Manual Figure 7. Removal steps of fan assembly and heat sink assembly (continued) Loosen two screws 5 to detach the fan assembly and the heat sink assembly. c 5 a 5 b When installing: •• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the a b part shown in the figure above. Either too much or too less grease application can cause a thermal problem due to imperfect contact with a component. In models with the discrete graphics chip, there is an additional thermal rubber c whose film to be peeled off. 44
44
IdeaPad Y560 Hardware Maintenance Manual
Figure 7. Removal steps of fan assembly and heat sink assembly (continued)
Loosen two screws
5
to detach the fan assembly and the heat sink assembly.
a
b
c
5
5
When installing:
Before you attach the fan assembly to the computer, apply thermal grease,
•
at an amount of 0.2 grams, to the
a
b
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
chip, there is an additional thermal rubber
c
whose film to be peeled off.