Lenovo M5400 Touch Hardware Maintenance Manual - Lenovo B5400, M5400, M5400 To - Page 43

Hard disk drive and solid state disk

Get Lenovo M5400 Touch PDF manuals and user guides View all Lenovo M5400 Touch manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Lenovo B5400/M5400/M5400 Touch 1050 Hard disk drive and solid state disk For access, remove these FRUs in order: • "1010 Battery pack" on page 34 • "1020 Base cover" on page 35 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or in suspend mode. Figure 5. Removal steps of hard disk drive and solid state disk Remove the screw 1. Detach the HDD connector and then remove the hard disk drive from the slot in the direction shown by arrows 2 and 3.   Step Screw (quantity) 1 M2 × 4 mm, flat-head, nylok-coated (1) HDD BKT to BASE Color Torque Black 1.85+/-0.15 kgf*cm When installing: Make sure that the HDD connector is attached firmly. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
39
Lenovo B5400/M5400/M5400 Touch
1050 Hard disk drive and solid state disk
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 34
•
“1020 Base cover” on page 35
Attention:
•
Do not drop the hard disk drive or apply any physical shock to it.
The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
•
Before removing the drive, suggest the customer to backup all the information on
it if possible.
•
Never remove the drive while the system is operating or in suspend mode.
Figure 5. Removal steps of hard disk drive and solid state disk
Remove the screw
1
. Detach the HDD connector and then remove the hard
disk drive from the slot in the direction shown by arrows
2
and
3
.
±
²
³
Step
Screw (quantity)
Color
Torque
1
M2 × 4 mm, flat-head, nylok-coated (1)
HDD BKT to BASE
Black
1.85+/-0.15 kgf*cm
When installing:
Make sure that the HDD connector is attached firmly.