Lenovo Miix 3-1030 Hardware Maintenance Manual - Lenovo MIIX 3-1030 - Page 34
LCD cover, Removal step of LCD cover - specs
View all Lenovo Miix 3-1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
MIIX 3-1030 Hardware Maintenance Manual 1010 LCD cover Figure 1. Removal step of LCD cover Firstly, the suction cup*1 to stick under the camera's position, use your hand pull the suction cup. Then insert prying tool*2 between the logo "lenovo" and the camera, slide it around. Secondly, move suction cup to the right corner, insert prying tool, push hard against the top right corner of the panel module, make the upper of right LCD cover and panel module complete separation. Prying tool transfer to the right between LCD cover and panel module sliding, make LCD cover and panel module separation. Thirdly, move suction cup to the left corner, insert prying tool, push hard against the top left corner of the panel module, make the upper of left LCD cover and panel module complete separation. Prying tool transfer to the left between LCD cover and panel module sliding, make LCD cover and panel module separation. Finally, use hand hold the panel module, rise up the LCD cover. *1 Suction cup specs: Diameter 30~60 mm, TPE material, transparent. *2 Prying tool: A thin plastic plate, like a guitar pick. Note: Be careful when separating the LCD cover. Do not force apart the LCD cover, otherwise the panel module could be damaged. Use caution when internal plastic tabs are met with the prying tool, excessive force may cause damage. 1 2 4 3 30