Lenovo Miix 3-1030 Hardware Maintenance Manual - Lenovo MIIX 3-1030 - Page 47
Keyboard dock back cover (on select models
View all Lenovo Miix 3-1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Lenovo MIIX 3-1030 1100 Keyboard dock back cover (on select models) Figure 10. Removal steps of keyboard dock back cover (on select models) Pry up both ends of the rubber strip in the direction shown by arrows 1 and 2. Open the two rubber feet in the direction shown by arrows 3. Note: The two rubber feet are connected to the dock back cover (see illustration below, marked in the red). Do not use too much force when opening the two rubber feet, otherwise they might break off from the back cover. 1 2 3 3 Then remove the four screws 4. 4 4 4 4 Step 4 Screw (quantity) Color Torque M2.0 × 2.5, flat-head, nylok-coated, Rubber Foot (4) Black 1.6~2 kgf*cm 43
43
Lenovo MIIX 3-1030
1100 Keyboard dock back cover (on select models)
Figure 10. Removal steps of keyboard dock back cover (on select models)
Pry up both ends of the rubber strip in the direction shown by arrows
1
and
2
.
Open the two rubber feet in the direction shown by arrows
3
.
Note:
The two rubber feet are connected to the dock back cover (see illustration
below, marked in the red). Do not use too much force when opening the
two rubber feet, otherwise they might break off from the back cover.
3
3
1
2
Then remove the four screws
4
.
4
4
4
4
Step
Screw (quantity)
Color
Torque
4
M2.0 × 2.5, flat-head, nylok-coated, Rubber Foot (4)
Black
1.6~2 kgf*cm