Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2259 and 6049 s - Page 21

the CD-ROM drive to connect the audio, connector on the rear edge of

Page 21 highlights

IBM NetVista Type 6049 and 2259 Refresh 1.1 13.Lastly, connect the cables of the floppy drive as you did with the CD-ROM and hard disk drive. The edge of the cable that is yellow should situate firmly on the plastic shroud. 14.Then connect the other end to the Floppy drive. 15.Use the audio cable provided with the CD-ROM drive to connect the audio connector on the rear edge of the CD-ROM drive to one of the audio-in connectors on the mainboard. The audio sound does not come from the mainboard itself. Version: HMM02 21 of 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

IBM NetVista
Type 6049 and 2259 Refresh 1.1
Version: HMM02
21 of 35
13
.Lastly, connect the cables of the
floppy drive as you did with the
CD-ROM and hard disk drive. The edge
of the cable that is yellow should situate
firmly on the plastic shroud.
14
.Then connect the other end to the
Floppy drive.
15
.Use the audio cable provided with
the CD-ROM drive to connect the audio
connector on the rear edge of the
CD-ROM drive to one of the audio-in
connectors on the mainboard. The audio
sound does not come from the mainboard
itself.