Lenovo ThinkCentre M57 Korean (User guide) - Page 51

Grant Remote Digital Loopback Test request

Get Lenovo ThinkCentre M57 PDF manuals and user guides View all Lenovo ThinkCentre M57 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

mIn Z_ .e AT mIn mIn &C_ &D_ &F_ &G_ &K_ &M_ &P_ &R_ &S_ &T_ X4 Z0 Z1 &C0 &C1 &D0 &D1 &D2 &D3 &F &G0 &G1 &G2 &K0 &K3 &K4 &K5 &K6 &M0 &P0 &P1 &P2 &P3 &R0 &R1 &S0 &S1 &T0 &T1 &T3 &T4 &T5 bI All responses and dial tone and busy signal detection Reset and retrieve active profile 0 Reset and retrieve active profile 1 bI Force Carrier Detect Signal High (ON) Turn on CD when remote carrier is present Modem ignores the DTR signal Modem returns to Command Mode after DTR toggle Modem hangs up, returns to the Command Mode after DTR toggle Resets modem after DTR toggle Recall factory default configuration Guard tone disabled Guard tone disabled 1800Hz guard tone Disable flow control Enable RTS/CTS hardware flow control Enable XON/XOFF software flow control Enable transparent XON/XOFF flow control Enable both RTS/CTS and XON/XOFF flow control Asynchronous operation US setting for off-hook-to-on-hook ratio UK and Hong Kong off-hook-to-on-hook ratio Same as &P0 setting but at 20 pulses per minute Same as &P1 setting but at 20 pulses per minute Reserved CTS operates per flow control requirements Force DSR Signal High (ON) DSR off in command mode, on in on-line mode Ends test in progress Perform Local Analog Loopback Test Perform Local Digital Loopback Test Grant Remote Digital Loopback Test request by remote modem Deny Remote Digital Loopback Test request NO A. v? p) mIn 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
´
µ
³
²
±
X4
All responses and dial tone and busy
signal
detection
Z_
Z0
Reset and retrieve active profile 0
Z1
Reset and retrieve active profile 1
²
±
AT
µ
¸
³
´
µ
³
²
±
&C_
&C0
Force Carrier Detect Signal High (ON)
&C1
Turn on CD when remote carrier is present
&D_
&D0
Modem ignores the DTR signal
&D1
Modem returns to Command Mode after DTR
toggle
&D2
Modem hangs up, returns to the Command
Mode after DTR toggle
&D3
Resets modem after DTR toggle
&F_
&F
Recall factory default configuration
&G_
&G0
Guard tone disabled
&G1
Guard tone disabled
&G2
1800Hz guard tone
&K_
&K0
Disable flow control
&K3
Enable RTS/CTS hardware flow control
&K4
Enable XON/XOFF software flow control
&K5
Enable transparent XON/XOFF flow control
&K6
Enable both RTS/CTS and XON/XOFF flow
control
&M_
&M0
Asynchronous operation
&P_
&P0
US setting for off-hook-to-on-hook ratio
&P1
UK and Hong Kong off-hook-to-on-hook ratio
&P2
Same as &P0 setting but at 20 pulses per minute
&P3
Same as &P1 setting but at 20 pulses per minute
&R_
&R0
Reserved
&R1
CTS operates per flow control requirements
&S_
&S0
Force DSR Signal High (ON)
&S1
DSR off in command mode, on in on-line mode
&T_
&T0
Ends test in progress
&T1
Perform Local Analog Loopback Test
&T3
Perform Local Digital Loopback Test
&T4
Grant Remote Digital Loopback Test request by
remote modem
&T5
Deny Remote Digital Loopback Test request
³
±
A.
³
·
»
¼
±
¸
²
43