Lenovo ThinkPad 380ED TP 380Z Setup Guide that was provided with the system in - Page 2

Electrical Safety DANGER Electrical current from power, telephone, and communication cable is hazardous. To avoid shock hazard, connect and disconnect cables as shown below when installing, moving, or opening the covers of the product or attached devices. The 3-pin power cord must be used with a proper outlet. To Connect Turn everything OFF. Attach all cables to devices. Attach the signal cables to receptacles. Using the TrackPoint The TrackPoint is a unique device for moving the cursor on the screen. You can perform all mouse operations with the TrackPoint. The left and right buttons function like the left and right buttons on a mouse. To move the cursor, use the red-topped stick at the center of the keyboard. Press gently with your left or right index finger in the direction you want to move the cursor. To select and drag an object, press and hold one of the buttons with either thumb as required by your software. Click means to press the left button once. Double-click means to press the left button twice within 1 second. Attach the power cord to an outlet. Turn the device ON. Cursor Stick Title: C79EOMST CreationDate: 06/21/98 18:45:07 To Disconnect Turn everything OFF. First, remove the power cord from the outlet. Remove signal cables Remove all cables from receptacles. from devices. Left click button Right click button For more information about the TrackPoint, see the User's Reference. Note: In the U.K., by law: The telephone line cable must be connected after the power cord. The power cord must be disconnected after the telephone line cable. 2