Lenovo ThinkPad 770Z ThinkPad 770E/ED Supplement to the Users Guide - Page 22
Setting to 2-Channel IDE Mode, ThinkPad Configuration, Docking Station, IRQ Holder for PCI Steering
View all Lenovo ThinkPad 770Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting to 2-Channel IDE Mode 1 Open the ThinkPad Configuration program. 2 Click on the Docking Station ( ) button. 3 Change the IRQ value in IRQ Holder for PCI Steering to a value other than IRQ 11. 4 Select Enable IDE devices. The third IDE is automatically selected. 5 Select Secondary channel in the IDE channel selection list box. 6 Click on Disable Device in the warning message dialog box. 7 Click on OK to close the dialog box. 8 Select OK in the warning dialog box. The system restarts. If necessary, change the IRQ value assigned to PCI to 11. The following table shows the relationship between the devices and IRQ values: Device HDD UltraBay II Docking station 2-Channel IDE Default Mode IRQ 14, P-M IRQ 15, S-M Disabled 3-Channel IDE Mode IRQ 14, P-M IRQ 15, S-M IRQ 11, T-M and T-S 2-Channel IDE Mode IRQ 14, P-M IRQ 14, P-S IRQ 15, S-M and S-S Legend: 1. P-M: Primary-master 2. P-S: Primary-slave 3. S-M: Secondary-master 4. S-S: Secondary-slave 5. T-M: Third-master 6. T-S: Third-slave 16 IBM ThinkPad 770E/770ED User's Guide Supplement