Lenovo ThinkServer RD330 Hardware Maintenance Manual - ThinkServer RD330 - Page 108
Removing the ThinkServer RAID 700 Battery, on the ThinkServer RAID 700 Adapter. Carefully
View all Lenovo ThinkServer RD330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Note: Carefully handle the ThinkServer RAID 700 Adapter by its edges and place it on a flat, clean, and static-protective surface after you remove it. 8. Touch the static-protective package that contains the TR 700 Battery to any unpainted surface on the outside of the server. Then, take the TR 700 Battery out of the package. 9. Hold the TR 700 Battery with the battery side up and the board-to-board connector 1 on the bottom of the TR 700 Battery lining up with the connector 2 on the ThinkServer RAID 700 Adapter. Carefully install the TR 700 Battery onto the ThinkServer RAID 700 Adapter so that the two connectors are firmly joined. Then, install the three screws that come with the TR 700 Battery option kit to secure the TR 700 Battery in place. Notes: • Center the screwdriver when you install the screws and do not over-tighten the screws to avoid possible damage to any parts. • Do not touch the board on the bottom of the TR 700 Battery. Figure 49. Installing the TR 700 Battery 10. Reinstall the ThinkServer RAID 700 Adapter with the TR 700 Battery to the riser card assembly 2. See "Installing or removing the RAID card" on page 85. 11. Reconnect cables to the ThinkServer RAID 700 Adapter. See "Mini-SAS to mini-SAS signal cable connections" on page 30. 12. Reinstall the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See "Replacing the riser card assembly 1" on page 143. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation, go to "Completing the parts replacement" on page 153. Then, configure RAID for your server. See "Configuring RAID" on page 56. Removing the ThinkServer RAID 700 Battery Attention: Do not open your server or attempt any repair before reading and understanding "Safety information" on page iii and "Guidelines" on page 67. This topic provides instructions on how to remove the TR 700 Battery from a ThinkServer RAID 700 Adapter if your server has a ThinkServer RAID 700 Adapter with a TR 700 Battery installed. 94 ThinkServer RD330 Hardware Maintenance Manual