Lenovo ThinkVision LT1423p 13.3-inch IPS WLED Backlit LCD Mobile Touch Monitor W - Page 19
Adjusting your monitor image, Using the On-Screen Display OSD controls
View all Lenovo ThinkVision LT1423p 13.3-inch IPS WLED Backlit LCD Mobile Touch Monitor With Pen manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the On-Screen Display (OSD) controls The display settings can be viewed through the on-screen-display (OSD), as shown below USB video connection When WIFI is ready To use the controls: 1. Press to open the main OSD menu. If wireless connection is made via the LT1423pwCA control panel, and the display is normal, you can press the " " button to turn on the OSD of LT1423pwCA control panel on the computer, and you need to use the mouse to operate it. Please refer to Point 4 of "Wireless Using" in 4-9. 2. Use or to move across the icons. Select an icon and press to access that function. Then use or to make adjustments, when you're satisfied with the settings, press to exit the current adjustment. 3. Press to exit from the OSD. 4. " " is hot key for adjust the image. Table 2-1. OSD functions OSD Icon on Main Menu Brightness Description Adjusts overall brightness. Note: In the wireless mode, if the LT1423pwCA device is not connected through the LT1423pwCA control panel, and the current brightness is 100, you can long press the + key for ten seconds to enter the brightness enhancement mode, to get 10-order brightness. The maximum brightness is 110. This mode will be released when the USB cable is connected or the brightness is adjusted to 100 or below. Contrast Automatic Option Channel Exit Adjusts difference between light and dark areas. Automatically optimizes the image. Note: The function is activated during image displayed through USB connection. Go to the options menu. Adjust the monitor's WIFI channel to match your WIFI adapter. Note: This function is only available when the monitor's WIFI is Ready to connect. Exit from the OSD. Chapter 2. Adjusting and using your monitor 2-3