Lenovo V370 Lenovo V370 Hardware Maintenance Manual - Page 65

LCD panel, LCD cable and hinges

Page 65 highlights

Lenovo V370 1150 LCD panel, LCD cable and hinges For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1020 Dummy card" on page 35 •• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover" on page 36 •• "1040 Hard disk drive" on page 37 •• "1050 DIMM" on page 38 •• "1060 PCI Express Mini Card for wireless LAN" on page 39 •• "1070 Keyboard" on page 41 •• "1080 Keyboard bezel" on page 43 •• "1090 System board" on page 48 •• "1100 LCD unit" on page 51 •• "1140 LCD front bezel" on page 60 Figure 16. Removal steps of LCD panel, LCD cable and hinges Remove four screws 1 and two screws 2. Remove the integrated camera connector in the direction shown by arrow 3. Lift the LCD panel in the direction shown by arrows 4. 1 1 4 2 4 3 1 1 2 4 When installing: Make sure that the connector is attached firmly. Step 1 2 Screw (quantity) M2 × 3 mm, flat-head, nylok-coated (4) M2 × 3 mm, flat-head, nylok-coated (2) Color White Black Torque 1.6 kgfcm 1.6 kgfcm 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

61
Lenovo V370
1150 LCD panel, LCD cable and hinges
For access, remove these FRUs in order:
“1010 Battery pack” on page 34
“1020 Dummy card” on page 35
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 36
“1040 Hard disk drive” on page 37
“1050 DIMM” on page 38
“1060 PCI Express Mini Card for wireless LAN” on page 39
“1070 Keyboard” on page 41
“1080 Keyboard bezel” on page 43
“1090 System board” on page 48
“1100 LCD unit” on page 51
“1140 LCD front bezel” on page 60
Figure 16. Removal steps of LCD panel, LCD cable and hinges
Remove four screws
1
and two screws
2
. Remove the integrated camera
connector in the direction shown by arrow
3
. Lift the LCD panel in the direction
shown by arrows
4
.
4
4
2
2
4
3
1
1
1
1
When installing:
Make sure that the connector is attached firmly.
Step
Screw (quantity)
Color
Torque
1
M2 ×
3 mm, flat-head, nylok-coated (4)
White
1.6 kgfcm
2
M2 ×
3 mm, flat-head, nylok-coated (2)
Black
1.6 kgfcm