Lenovo V4400u Hardware Maintenance Manual - Lenovo V4400u - Page 69
Thermal sensor, Remove the screws
View all Lenovo V4400u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the screws 2 , and then remove the I/O board 3 . 2 2 3 Step 2 Screw (quantity) M2 × 4 mm, flat-head, nylon-coated (2) 1170 Thermal sensor For access, remove these FRUs in order: • "1020 Base cover" on page 43 • "1030 Battery pack" on page 44 • "1080 Hard disk drive assembly" on page 48 Removal steps of the thermal sensor Detach the connector 1 . Color Black Torque 0.181 Nm (1.85 kgf-cm) 1 When installing: Ensure that the connector is firmly attached to the system board. Chapter 8. Removing or replacing a FRU 63
Remove the screws
2
, and then remove the I/O board
3
.
3
2
2
Step
Screw (quantity)
Color
Torque
2
M2 × 4 mm, flat-head, nylon-coated (2)
Black
0.181 Nm
(1.85 kgf-cm)
1170 Thermal sensor
For access, remove these FRUs in order:
•
“1020 Base cover” on page 43
•
“1030 Battery pack” on page 44
•
“1080 Hard disk drive assembly” on page 48
Removal steps of the thermal sensor
Detach the connector
1
.
1
When installing:
Ensure that the connector is firmly attached to the system board.
Chapter 8
.
Removing or replacing a FRU
63