Lenovo X200s Hardware Maintenance Manual - Page 116
application
UPC - 884942322655
View all Lenovo X200s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Table 27. Removal steps of system board, DC-in connector, fan, and ExpressCard slot assembly for ThinkPad X200s (continued) When installing: v Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubber b . b a v Make sure that the fan connector is attached firmly. Note: The ExpressCard slot assembly is attached to the system board. 1 Step 1 Screw (quantity) Color M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver Torque 0.181 Nm (1.85 kgfcm) 108 ThinkPad X200 and X200s Hardware Maintenance Manual