Lenovo Z50-70 Hardware Maintenance Manual - Lenovo G50-30, G50-45, G50-70, Z50 - Page 41

Hard disk drive, Attention

Get Lenovo Z50-70 PDF manuals and user guides View all Lenovo Z50-70 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Lenovo G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 1040 Hard disk drive For access, remove these FRUs in order: • "1010 Battery pack" on page 33 • "1020 Base cover" on page 34 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or in suspend mode. Figure 4. Removal steps of hard disk drive Remove the screws 1. Detach the HDD connector and then remove the hard disk drive from the slot in the direction shown by arrow 2.     Step Screw (quantity) 1 M2 × 3.5 mm, flat-head, nylok-coated (3 or 4) HDD BRK + D Color Torque Black 1.5 ~ 2.0 kgf*cm When installing: Make sure that the HDD connector is attached firmly. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
37
Lenovo G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75
1040 Hard disk drive
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 33
•
“1020 Base cover” on page 34
Attention:
•
Do not drop the hard disk drive or apply any physical shock to it.
The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
•
Before removing the drive, suggest the customer to backup all the information on
it if possible.
•
Never remove the drive while the system is operating or in suspend mode.
Figure 4. Removal steps of hard disk drive
Remove the screws
1
. Detach the HDD connector and then remove the hard
disk drive from the slot in the direction shown by arrow
2
.
±
±
±
²
Step
Screw (quantity)
Color
Torque
1
M2 × 3.5 mm, flat-head, nylok-coated (3 or 4)
HDD BRK + D
Black
1.5 ~ 2.0 kgf*cm
When installing:
Make sure that the HDD connector is attached firmly.