Lenovo Z50-70 Hardware Maintenance Manual - Lenovo G50-30, G50-45, G50-70, Z50 - Page 46

Fan assembly

Get Lenovo Z50-70 PDF manuals and user guides View all Lenovo Z50-70 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 Hardware Maintenance Manual 1070 Fan assembly Attention: For the Lenovo G50-30, select models (computers with UMA architecture) do not have a thermal fan. For access, remove these FRUs in order: • "1010 Battery pack" on page 33 • "1020 Base cover" on page 34 Figure 7. Removal steps of fan assembly Unplug the fan connector in the direction shown by arrow 1. Then remove the screws 2.     Note: Be careful not to damage the connector. Step Screw (quantity) 2 M2 × 3.5 mm, flat-head, nylok-coated (3) Fan + MB Color Torque Black 1.5 ~ 2.0 kgf*cm When installing: Make sure that the connector is attached firmly. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
42
G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 Hardware Maintenance Manual
1070 Fan assembly
Attention:
For the Lenovo G50-30, select models (computers with UMA architecture)
do not have a thermal fan.
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 33
•
“1020 Base cover” on page 34
Figure 7. Removal steps of fan assembly
Unplug the fan connector in the direction shown by arrow
1
. Then remove the
screws
2
.
±
²
²
²
Note:
Be careful not to damage the connector.
Step
Screw (quantity)
Color
Torque
2
M2 × 3.5 mm, flat-head, nylok-coated (3)
Fan + MB
Black
1.5 ~ 2.0 kgf*cm
When installing:
Make sure that the connector is attached firmly.