Lexmark 13B0500 User Manual - Page 180
Unformatted flash detected, 54 Network <x> software error, 54 Standard network software error
View all Lexmark 13B0500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
53 Unformatted flash detected Try one or more of the following: • Press the arrow buttons until Continue appears, and then press to continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing. 54 Network software error The printer detects that a network port is installed, but cannot communicate with it. The printer disables all communication to the associated network interface. Try one or more of the following: • Press to clear the message and continue printing. • Turn the power off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. 54 Standard network software error Try one or more of the following: • Press the arrow buttons until Continue appears, and then press • Turn the printer off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. to continue printing. 56 Standard USB port disabled Try one or more of the following: • The printer discards any data received through the USB port. Press • Make sure the USB Buffer menu item is not set to Disabled. to clear the message and continue printing. 58 Too many flash options installed Try one or more of the following: • Turn the printer off, and then remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. • Press to clear the message and continue printing. 58 Too many trays attached 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the additional trays. Troubleshooting 180