Lexmark 20G0130 Technical Reference - Page 157
Lines Per Inch
UPC - 734646721325
View all Lexmark 20G0130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
3-41 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LPPDS (DEFAULT only) LPPDSFORMLINES (DEFAULT only) LPPDSLINESPERINCH (DEFAULT only) LPREPRINTEDLENGTH (DEFAULT only) LPREPRINTEDLOADING (DEFAULT only) Function Selections Factory Default Activate Personal Printer Data Stream (PPDS) printer language ON, OFF Use ON to enable PPDS printer language and OFF to disable PPDS printer language. After this command is processed, the printer performs a Power On Reset (POR) to activate the changes. OFF Note: The following printer settings in NVRAM are changed when PPDS is activated: • PCL and PS SmartSwitch settings for each port are turned off. • Printer Language is set to PPDS. Lines Per Page 1 to 255 (PPDS) 64, 68 (Country specific) Lines Per Inch Preprinted Paper Length 0.25 to 30.00 in increments of 0.25 6.00 Note: If a Lines Per Inch setting outside this range is specified, the printer defaults to the closest number in the range. NORMAL, SHORT NORMAL Preprinted OFF, DUPLEX Paper Loading OFF