Lexmark 20G0130 Technical Reference - Page 359
RS-232C Port Compatibility, Network Support
UPC - 734646721325
View all Lexmark 20G0130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
8-28 Interfaces Windows 95/98/Me/2000, Windows NT 4.0, and Windows XP: For correct operation of the RS-232C serial interface, while setting up your communications port, make sure you selected Hardware in the Flow Control field. Selecting Hardware sets the communication to DTR protocol. See the following sections for more information: • "Setting Up the Communications Port Using Windows 95/98/Me" on page 8-2 • "Setting Up the Communications Port Using Windows NT 4.0" on page 8-3 • "Setting Up the Communications Port Using Windows 2000" on page 8-4 • "Setting Up the Communications Port Using Windows XP" on page 8-5 RS-232C Port Compatibility The RS-232C port (on the RS-232C Serial Interface Card or the RS-232C Serial/Parallel 1284-C Interface Card) is compatible with the Plug and Play External COM Device Draft Specification, Rev. 0.86. Devices that are compatible with Plug and Play COM can: • Detect attachment of serial devices. • Identify the device. • Locate a driver for the device. • Detect detachment of serial devices. Network Support Installing an internal print server enables you to connect your printer to a local area network (LAN). The print server supports these network interfaces: • The Token-Ring print server conforms to IEEE 802.5 using either IBM Cabling System (STP) or unshielded twisted-pair cable, which meets the IBM Cabling System Type 3 Media Specification (UTP). • The Ethernet Combined 10BaseT and 10Base2 print server conforms to IEEE 802.3 with a Category 3, 4, or 5 unshielded twisted-pair (UTP) cable for the 10BaseT and conforms to IEEE 802.3 with an RG58 coaxial cable for the 10Base2.