Lexmark 23B0225 Clearing Jams Guide - Page 2

Area C, Area D, Area T1, Area E, Area T<x&gt, Area J, Area K, Area L

Page 2 highlights

Area C 1 Open the 500-sheet drawer access door. Hold the door down while removing jams. Area E 1 Pull the duplex tray E completely out. Remove any paper caught in the rollers or inside the printer. Area K 1 Open the lower right access door. 2 Make sure the entire paper stack is loaded correctly, and then close the door. Area D 1 Open the front access door. 2 Hold down the front access door. Remove jams in the rollers under the image transfer unit. 2 Reinstall the duplex mechanism in the printer. Area T 1 Carefully open trays 2 through 4 (all 500-sheet trays), and then remove jams. 2 Make sure the paper is pushed all the way down into the tray, and then close trays 2 through 4. Area J 1 Remove the duplex tray J. 2 Remove any jams, and then close the door. Area L 1 Open the upper right access door. Area T1 1 Open tray 1. 2 Remove any jams. 3 Make sure the paper is pushed all the way down into the tray, and then close tray 1. 2 Remove any jams, and then reinstall the tray. 2 Remove jams from the rollers, and then close the door.

  • 1
  • 2
  • 3
  • 4
  • 5

Area C
1
Open the 500-sheet drawer access door. Hold
the door down while removing jams.
2
Make sure the entire paper stack is loaded
correctly, and then close the door.
Area D
1
Open the front access door.
2
Hold down the front access door. Remove jams
in the rollers under the image transfer unit.
Area T1
1
Open tray 1.
2
Remove any jams.
3
Make sure the paper is pushed all the way down
into the tray, and then close tray 1.
Area E
1
Pull the duplex tray E completely out. Remove
any paper caught in the rollers or inside the
printer.
2
Reinstall the duplex mechanism in the printer.
Area T<x>
1
Carefully open trays 2 through 4 (all 500-sheet
trays), and then remove jams.
2
Make sure the paper is pushed all the way down
into the tray, and then close trays 2 through 4.
Area J
1
Remove the duplex tray J.
2
Remove any jams, and then reinstall the tray.
Area K
1
Open the lower right access door.
2
Remove any jams, and then close the door.
Area L
1
Open the upper right access door.
2
Remove jams from the rollers, and then close
the door.