Lexmark C912 Service Manual - Page 102

5055-xxx Clearing finisher messages Message Solution Bin Full Remove the stack of paper from the bin to clear the message. If you assigned the bin a name, the bin name is displayed instead of the bin number. Press Go to clear the message and continue printing. Check Finisher Installation Make sure the finisher is flush against the printer. If this does not resolve the problem, go to "Finisher service check" on page 2-71 to check the finisher set switch. Close Finisher Top Close the finisher top cover and align the finisher flush Cover against the printer to clear the message. Empty Box Empty the hole punch box to continue printing. Leave Staple Job in Finisher The printer has detected a paper jam while printing a job that must be stapled. The message Leave Staple Job in Finisher alternates with the Paper Jam message. Leave the printed pages on the stacking tray inside the finisher and clear the paper jam in the printer. Press Go to clear the message and continue printing. Staples Empty Replace the staple cartridge if you want to continue stapling. You can press Go to clear the message and continue printing without stapling. Stapler Missing The staple holder is missing. Place the staple holder in the stapler to clear the message. Go to "Finisher service check" on page 2-71 to check the no staple sensor. Insert Hole Punch Box Install the hole punch box. The printer will automatically clear the message. Go to "Finisher service check" on page 2-71 to check the punch box detect sensor. 2-52 Service Manual