Lexmark C912 Service Manual - Page 199

5055-xxx Check Area E This message indicates a paper jam in the top, middle, or bottom optional drawer paper path area. To clear area E: Note: If you have a high capacity feeder, pull it away from the printer. 1. Open the jam access door on the top optional drawer. 2. Remove the jam. 3. Close the jam access door. 4. Open the jam access door on the middle drawer. 5. Remove the jam. 6. Close the door. 7. Open the jam access door on the bottom drawer. 8. Remove the jam. 9. Close the door. 10. Press Go. If the paper jam message continues, clear any paper from the paper path. Check Area F 1. Pull the high capacity feeder away from the printer. 2. Open the jam access door on the top optional drawer. 3. Remove any jam. 4. Close the jam access door. 5. Slide the high capacity feeder until it locks to the docking frame. When the feeder is in the correct position, you hear a click. 6. Press Go. If the paper jam message continues, check and clear all paper from the paper path. Diagnostic aids 3-49