Lexmark C920 Service Manual - Page 79

5056-XXX Message Serial Some held jobs were lost Staples Empty Staples Low Standard Bin Full Submitting selection Transfer Belt Life Warning Tray Empty Tray Low Tray Missing USB USB USB drive removed View supplies Waiting Meaning Action See action column. The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is enough printer memory to process the job. Staple cartridge status message A serial interface is the active communication link. -Select Continue to clear the message and continue printing. -Cancel the current job. -Install a new staple cartridge. -Select Continue to clear the message and continue printing without stapling. -Cancel the current job. Output bin full. Remove the stack of paper from the bin to clear the message. The printer is processing a selection request. Wait for the message to clear. The transfer belt is nearing the end of life. -Select Continue to clear the message and print without installing a new transfer belt. -Replace the transfer belt and, if necessary, reset the printer internal counter for the transfer belt. The specified paper tray is empty. Load paper in the tray to clear the message. The specified paper tray is low. Add paper to the tray to clear the message. The specified paper tray is missing or improperly installed. See action column. Insert the tray into the printer. The printer is processing data through the specified USB port. The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command, or additional data. -Wait for the message to clear. -Insert the USB drive. Displays the current level of all printer supplies. -Press Select to print the contents of the buffer. -Cancel the current job. 1565 Emul Error Load Emul Option 30 Coating roll missing 30 print unit missing 34 Incorrect media The printer automatically clears the message in 30 seconds, and then disables the download emulator on the firmware card. The coating roll in the fuser is improperly installed or missing. The specified color print unit is improperly installed or missing. Download the correct download emulator version from the Lexmark Web site. Install the coating roll, and close the top cover. Install the specified print unit, and close the top cover. -Load the appropriate media in the selected source. -Select Continue to clear the message and print the job using a different paper source. Diagnostic information 2-37