Lexmark CX727 Users Guide PDF - Page 142
Adjusting ADF registration, Cannot scan from a computer, Settings, Maintenance, Configuration Menu
View all Lexmark CX727 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Troubleshooting 142 Adjusting ADF registration 1 From the control panel, navigate to: Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration 2 From the Print Quick Test menu, touch Start. 3 Place the Print Quick Test page on the ADF tray. 4 Touch Front ADF Registration or Rear ADF Registration. Notes: • To align Front ADF Registration, place the test page faceup, short edge first into the ADF. • To align Rear ADF Registration, place the test page facedown, short edge first into the ADF. 5 From the Copy Quick Test menu, touch Start. 6 Compare the Copy Quick Test page with the original document. Note: If the margins of the test page are different from the original document, then adjust Horizontal Adjust and Top Margin. 7 Repeat step 5 and step 6 until the margins of the Copy Quick Test page closely match the original document. Cannot scan from a computer Action Yes Step 1 The problem is a Turn off the printer, wait for about 10 seconds, and then turn it solved. back on. b Resend the scan job. Can you send the scan job? Step 2 a Make sure that the cables between the printer and the print server are secure. The problem is solved. For more information, see the setup documentation that came with the printer. b Resend the scan job. Can you send the scan job? No Go to step 2. Contact customer support.