Lexmark Consumer Inkjet Setup Guide (575 KB) - Page 22
Solution Center, If the test prints, your printer is working properly. Check
View all Lexmark Consumer Inkjet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
usb-lexmark_Z65 or USB001. To check the printer port and change it, if necessary, follow the steps for your operating system. Windows 98/Me Windows 2000 Windows XP 1 Click Start Settings Printers. 2 Right-click the Lexmark Z65 printer icon, and then click Properties. 3 Click the Details tab. 4 From the Ports drop-down menu, select the printer port. 5 If the correct port is not listed, uninstall and then reinstall the printer software. For help, see page 20. 6 Click OK. 1 Click Start Settings Printers. 2 Right-click the Lexmark Z65 printer icon, and then click Properties. 3 Click the Ports tab. 4 From the list of ports, select the correct printer port. 5 If the correct port is not listed, uninstall and then reinstall the printer software. For help, see page 20. 6 Click Apply. 7 Click OK. 1 Click Start Control Panel Printers and Other Hardware Printers and Faxes. 2 Right-click the Lexmark Z65 printer icon, and then click Properties. 3 Click the Ports tab. 4 From the list of ports, select the correct printer port. 5 If the correct port is not listed, uninstall and then reinstall the printer software. For help, see page 20. 6 Click Apply. 7 Click OK. If your document did not print, print a test page: 1 From your desktop, double-click the Lexmark Z65 Solution Center icon. 2 From the Troubleshooting tab, click Print a test page. - If the test page prints, your printer is working properly. Check your software application documentation for troubleshooting information. - If the test page does not print, click the Help button on the error message that appears or refer to the printer software Help (see page 12). 19