Lexmark E220 Setup Guide - Page 17
Removing the system board shield, Installing a memorycard, Follow the instructions in this
View all Lexmark E220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Removing the system board shield Use a No. 2 Phillips screwdriver to remove the system board shield. 1 Remove the top screw and set it aside. 2 Loosen the bottom three screws, but do not remove them. 3 Slide the system board shield along the top and bottom grooves and set it aside. Installing a memory card Follow the instructions in this section to install a printer memory card. The system board has two connectors for optional memory cards. You can install a card in either connector. Install memory cards 10
10
Install memory cards
Removing the system board shield
Use a No. 2 Phillips screwdriver to
remove the system board shield.
1
Remove the top screw and set it
aside.
2
Loosen the bottom three screws,
but do not remove them.
3
Slide the system board shield
along the top and bottom grooves
and set it aside.
Installing a memory card
Follow the instructions in this section to
install a printer memory card.
The system board has two connectors for
optional memory cards. You can install a
card in either connector.