Lexmark E220 Setup Guide - Page 31
Step6: Attach cables, USB cable
View all Lexmark E220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Step 6: Attach cables CAUTION: Do not connect or disconnect a communication port, a teleport, or any other connector during a lightning storm. You can attach your printer locally using either a USB or parallel connection. USB cable Be sure to match the USB symbol on the cable to the USB symbol on the printer. A USB port is standard on most base models. Windows 98 SE, Windows Me, Windows 2000, and Windows XP operating systems support USB connections. Some UNIX, Linux, and Macintosh computers also support USB connections. Refer to your computer operating system documentation to see if your system supports USB. To attach the printer to a computer: 1 Connect the printer to the computer using a USB or parallel cable. A USB port requires a USB cable such as Lexmark part number 12A2405 (2 m [6.5 ft]). Be sure to match the USB symbol on the cable to the USB symbol on the printer. 2 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 3 Turn on your printer. After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs. If you see a message other than Ready on the display, refer to the publications CD for instructions on clearing the message. Click Printing, and then click Understanding printer messages. Attach cables 24