Lexmark E220 Service Manual - Page 160
E320/E322, Parallel NPA mode
View all Lexmark E220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
4500-E320/E322 Parallel NPA mode Parallel NPA mode allows two way communication between the host computer and the printer. Perform the following steps to change the Parallel NPA setting: 1. Enter the configuration mode. See "Configuration mode" on page 3-14 for more information. 2. Perform a double button press. This moves to the parallel NPA item on the configuration menu. The parallel NPA (Data) light comes on solid. 3. The current parallel NPA setting is indicated by the off/on/auto (Press Button) light. • When the light is on solid, all data received by the printer must be in NPA packets. Any non-packet data is rejected as bad packets. • When the light is off, the printer is not performing any NPA processing. • When the light is blinking, the printer examines incoming data and decides whether it is receiving NPA packets. 4. Perform a brief button press to select the parallel NPA setting. 5. Perform a long button press. All lights blink once, indicating the setting is saved. 6. Exit the configuration mode by turning the printer power off. Off/on/auto ❍ ● ✳ Setting value The parallel port does not search for NPA data within the received data. The parallel port requires that data sent to the printer be in NPA format. The parallel port searches for optional NPA data within the received data. 3-24 Service Manual