Lexmark E220 Service Manual - Page 161
E320/E322, Parallel protocol
View all Lexmark E220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
4500-E320/E322 Parallel protocol The printer supports two parallel protocol settings: standard and fastbytes. When the protocol is set to standard, information is received at a normal transmission rate. When the protocol is set to fastbytes, information is received at a much faster transmission rate provided the host computer supports the fastbytes mode. Perform the following steps to change the parallel protocol setting: 1. Enter the configuration mode. See "Configuration mode" on page 3-14 for more information. 2. Perform a double button press two times. This moves to the parallel protocol item on the configuration menu. The parallel protocol (Load Paper) light comes on solid. 3. The current parallel protocol setting is indicated by the off/on/auto (Press Button) light. When the light is off, the parallel protocol is set to standard. When the light is on, the parallel protocol is set to fastbytes. Perform a brief button press to select the parallel protocol setting. 4. Perform a long button press. All lights blink once, indicating the setting is saved. 5. Exit the configuration mode by turning the printer power off. Off/on/auto ❍ ● Setting value Parallel port uses Standard protocol. Parallel port uses Fastbytes protocol. Diagnostic aids 3-25