Lexmark E312 Service Manual - Page 63
the configuration menu. The first time through the menu the LED
UPC - 734646297004
View all Lexmark E312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4044-XXX the solid Ready LED. The setting of the menu item is indicated by the status of the Press Button LED. To change the menu item setting, briefly press the operator panel button. Once the setting you want is indicated by the status of the Press Button LED, perform a long button press to save the setting. All LEDs come on while the setting is saved. To select other menu items, double-click the operator panel button until the menu item LED you want is selected. There are ten menu items that can be selected by using the five LEDs as indicated by the following overlays on two passes through the configuration menu. The first time through the menu the LED selected is on solid. The second time through the menu the LED selected is blinking. First pass - LED on solid overlay. Parallel Port Parallel NPA Parallel Protocol PPDS CRLF/LFCR Off/On/Auto Operator Panel Button Second pass - LED blinking overlay Parallel Mode 1 Parallel Mode 2 Parallel Strobe USB Port USB NPA Off/On/Auto Operator Panel Button Diagnostic Aids 3-5