Lexmark E312 Service Manual - Page 72
Toggle Demo/Normal Mode, Printer Operation, printer is in Demo mode.
UPC - 734646297004
View all Lexmark E312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4044-XXX Toggle Demo/Normal Mode The Toggle Demo/Normal Mode function enables or disables the printer's retail demo mode. When the printer is in Demo mode, demo pages can be printed by briefly pressing the operator panel button. Perform the following steps to enter Toggle Demo/Normal Mode: 1. Turn the printer power off. 2. Open the top cover. 3. Turn the printer power on. 4. When the Error LED comes on solid, double-click the operator panel button. 5. Once the Error and Press Button LEDs start blinking, close the top cover. 6. The Ready LED comes on solid and the Error and Press Button LEDs continue blinking. 7. Double-click the operator button five times. The Ready and Load Paper LEDs come on solid while the Error and Press Button LEDs continue blinking. 8. Perform a long button press until all LEDs come on solid. The printer is in Demo mode. 9. To return the printer to Normal mode, repeat steps 1 through 8. Printer Operation Paper is held in a 150 page tray where it is picked by a center-fed "D" shape pick roller. The paper follows an "L" shape path as it moves through the printer. Images are created with toner on an OPC drum within the toner cartridge. A transfer roller then draws the toner off the OPC drum onto the paper. Once the toner is affixed to the paper by the fuser, the paper exits either the top or front of the printer. 3-14 Service Manual