Lexmark E312L Service Manual - Page 39
Fuser Service Check
View all Lexmark E312L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4044-XXX Fuser Service Check Cold Fuser Service Check When toner is partially fused to the paper, it is usually caused by low fuser temperature. Avoid handling the lamp as much as possible as it is easily broken. Be careful not to touch the glass housing with bare hands as skin contains acids that can weaken the glass. The line voltage to the printer must be within the following limits: 100 V ac - 127 V ac for the low voltage model printer 200 V ac - 240 V ac for the high voltage model printer Turn the printer off and wait a few minutes for the fuser lamp to cool. Turn the machine on and observe the lamp turning on during POST. You can see the lamp with the left side cover and fuser wire cover removed. Diagnostic Information 2-17
Diagnostic Information
2-17
4044-XXX
Fuser Service Check
Cold Fuser Service Check
When toner is partially fused to the paper, it is usually caused by low
fuser temperature.
Avoid handling the lamp as much as possible as it is easily broken.
Be careful not to touch the glass housing with bare hands as skin
contains acids that can weaken the glass.
The line voltage to the printer must be within the following limits:
100 V ac - 127 V ac for the low voltage model printer
200 V ac - 240 V ac for the high voltage model printer
Turn the printer off and wait a few minutes for the fuser lamp to cool.
Turn the machine on and observe the lamp turning on during POST.
You can see the lamp with the left side cover and fuser wire cover
removed.