Lexmark E352DN User's Guide - Page 31
Adding a memory card
View all Lexmark E352DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing options Adding a memory card The system board has one connector for an optional memory card. CAUTION: If you are installing a memory card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing. Note: Memory options designed for other Lexmark printers may not work with your printer. 1 Access the system board (see Accessing the system board on page28 ). 2 Push open the latches on both ends of the memory connector. 3 Unpack the memory card. Warning: Memory is easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card. Avoid touching the connection points along the edge of the card. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on each end of the card. 7 Close the side access door. 8 Close the rear exit door . 9 Close the front door. 10 Plug the power cord into the wall outlet and turn the printer on to continue print functions. Adding a memory card 31