Lexmark MS510 Print Quality Guide - Page 15
Vertical voids appear on prints, Step 1, Warning-Potential Damage
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Print Quality Guide Page 15 of 19 Action Step 1 a Make sure your software program is using a correct fill pattern. b Resend the print job. Yes Go to step 2. Do horizontal voids appear on prints? Step 2 a Load the specified tray or feeder with a recommended type of paper. b Resend the print job. Go to step 3. Do horizontal voids appear on prints? Step 3 Go to step 4. a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Reinstall the imaging unit, and then the cartridge. b Resend the print job. Do horizontal voids appear on prints? Step 4 Replace the imaging unit, and then resend the print job. Contact customer support. Do horizontal voids appear on prints? Vertical voids appear on prints Leading edge No The problem is solved. The problem is solved. The problem is solved. The problem is solved. Trailing edge Action Step 1 a Make sure your software program is using a correct fill pattern. b Resend the print job. Do vertical voids appear on prints? Yes Go to step 2. No The problem is solved.