Lexmark MS811 Printing Guide - Page 14
Slide the stack gently into the multipurpose feeder until it comes to a stop. - envelope feeder
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Printing Guide Page 14 of 16 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. • Flex the stack of envelopes back and forth to loosen them. Straighten the edges on a level surface. 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.