Lexmark MX710 User's Guide - Page 283

Troubleshooting 283 Scanner disabled. Contact system administrator if problem persists. [840.02] Try one or more of the following: • Touch Continue with scanner disabled to return to the home screen, and then contact your system support person. • Touch Reboot and automatically enable scanner to cancel the job. Note: This attempts to enable the scanner. Scanner jam, remove all originals from the scanner [2yy.xx] Remove the jammed paper from the scanner. Scanner jam, remove jammed originals from the scanner [2yy.xx] Remove the jammed paper from the scanner. Scanner maintenance required soon, use ADF Kit [80] Contact customer support, and then report the message. The printer is scheduled for maintenance. Serial option [x] error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Check that the serial cable is properly connected and is the correct one for the serial port. • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and computer. • Turn off the printer, and then turn it back on. Serial port [x] disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. The printer discards any data received through the specified serial port. • Make sure Serial Buffer is not set to Disabled. • From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu. Some held jobs were not restored From the printer control panel, touch Continue to delete the indicated job. Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.