Lexmark MX931 Users Guide - Page 200
Media Configuration, Universal Setup
View all Lexmark MX931 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Use printer menus 200 Menu item Description Substitute Size Off Statement/A5 Letter/A4 11 x 17/A3 All Listed* Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes: • Off prompts the user to load the required paper size. • All Listed allows all available substitutions. Configure MP Cassette* Manual First Determine the behavior of the multipurpose feeder. Notes: • Cassette configures the multipurpose feeder as the automatic paper source. • Manual sets the multipurpose feeder only for manual-feed print jobs. • First configures the multipurpose feeder as the primary paper source. Note: An asterisk (*) next to a value indicates the factory default setting. Media Configuration Universal Setup Menu item Description Units of Measure Inches Millimeters Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3.5-19 inches (8.5*) 88.9-482.6 mm (216*) Set the portrait width of the universal paper. Portrait Height 3.5-19 inches (14*) 88.9-482.6 mm (356*) Set the portrait height of the universal paper. Feed Direction Short Edge* Long Edge Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. Multiple Universal Sizes Tray [x] Multipurpose Feeder Assign a unique dimension for multiple universal sizes that are loaded in each paper source. Note: This setting appears only when enabled in the Device menu. From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray Configuration > Multiple Universal Sizes. Note: An asterisk (*) next to a value indicates the factory default setting.