Lexmark Monochrome Laser Clearing Jams - Page 1
Lexmark Monochrome Laser Manual
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Lexmark™ W820 Clearing Jams When a print media jam occurs, the printer displays a two-line 2xx Paper Jam message, and then stops operating. Clear jams by opening each door, cover, and tray on the printer and carefully removing any jammed print media. Note: Use the following illustration to identify doors, covers, and trays on the printer. Clearing the printer paper path 1 Open Doors B and C. 2 Clear any jams. 3 Open trays 1, 2, 3, and 4. 4 Clear any jams. 5 Make sure the print media is properly loaded in the trays. The paper guides should be lightly touching the print media so the stack cannot move in any direction. 6 Close trays 1, 2, 3, and 4. 7 Open tray 5 and check the see-through grid. Clear any jams. Note: If you have a multipurpose feeder, you do not need to remove it. 11 Open Door E if you have one. 12 Clear any jams from the rollers, gears, and grid. Lift the grid if necessary. Grid 18 Clear the standard bin area. Grid 8 Close tray 5. 9 Close Doors B and C. 10 Remove the envelope feeder if you have one. a Grasp the envelope feeder on each side. b Tilt it up slightly, and then pull it straight out. 13 Open Door A. CAUTION! The fuser may be hot. If so, allow time for the fuser to cool down before continuing. 14 Clear any jams from behind Door A. 15 Check for jams that may not be visible: a Push the lever toward the back of the printer to lock it into gear. b Move the lever up and down several times to force print media out of the fuser area. After all jams are cleared and all doors, covers, and trays are closed, printing automatically resumes. c Set the envelope feeder aside. c Release the lever. 16 Close Door A, and then Door E if you have one. 17 Replace the envelope feeder if you have one. Clearing mailbox jams 1 Pull any jammed print media in the bins straight out. 2 Open Door D. 3 Clear any jams from behind the door. 4 Lift the plastic deflector and pull out any print media. Plastic deflector 5 Close Door D.