Lexmark Multifunction Laser Clearing Jams Guide - Page 3
x and 24x jams
 |
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2 Remove the jammed media. 23x and 24x jams 1 Open the MFP paper tray, and remove any jammed media. 3 Open any optional trays beginning at the top, and remove any jammed media. Depending on the media location, pull the media either up or down. 3 Close the duplex rear door. Make sure it snaps into place. 2 Open the duplex tray. 4 Touch Continue. To remove the media, pull up. Pull the print media either up or down. If it does not pull easily one way, try the other way 4 If you have an optional 2000-sheet feeder, open the front door, press the elevator button to lower the tray, remove the jam, and make sure the stack of print media is neat and aligned. Elevator button 5 Touch Continue.
-
1 -
2 -
3 -
4
 |
 |
2
Remove the jammed media.
Depending on the media location, pull the
media either up or down.
3
Close the duplex rear door. Make sure it
snaps
into place.
4
Touch
Continue
.
23x and 24x jams
1
Open the MFP paper tray, and remove any
jammed media.
2
Open the duplex tray.
To remove the media, pull up.
3
Open any optional trays beginning at the top,
and remove any jammed media.
Pull the print media either up or down. If it does
not pull easily one way, try the other way
4
If you have an optional 2000-sheet feeder, open
the front door, press the elevator button to lower
the tray, remove the jam, and make sure the
stack of print media is neat and aligned.
5
Touch
Continue
.
Elevator button