Lexmark Optra S 1250 Card Stock & Label Guide - Page 125
Lexmark Optra S 1250 Manual
View all Lexmark Optra S 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Overview of label support Labels Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications Labels Width: Length: Weight: Thickness: Smoothness: 210-216 mm (8.3-8.5 in.) 279-356 mm (11-11.7 in.) 120-128 g/m2 0.13-0.20 mm (0.005-0.008 in.) 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Card stock Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm (11-11.7 in.) Up to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the diecuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Use grain long card stock, and set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. Printer specifications 125