Lexmark Optra S 1250 Card Stock & Label Guide - Page 140
Lexmark Optra S 1250 Manual
View all Lexmark Optra S 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
• For best results when using the multipurpose feeder, dual web and integrated labels should be fed paper-end first. • For best results when using the 250-sheet label tray, dual web and integrated labels should be fed label-end first. When printing on card stock: From the operator panel or MarkVision Professional, set the Paper Type to Card Stock. Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Do not use card stock that is creased. It may cause paper jams. To minimize curl, make sure the rear exit bin is open so the card stock feeds straight out the back of the printer. We recommend the use of grain short card stock. For more information, see "Maintenance procedures" on page 13. Optra N Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Always feed labels from the multipurpose tray. The multipurpose tray can hold up to 50 sheets of labels. The Optra N supports print materials up to 128 g/m2 (34 lb). The following table lists the maximum weights supported by the multipurpose tray. Overview of card stock and label support Card stock Paper source Multipurpose Tray Index Bristol - Tag - Cover - Paper 128 g/m2 Labels Vinyl - For paper and transparency specifications, see the printer User's Guide. Printer specifications 140