Lexmark Optra T616 2000-Sheet Drawer User's Guide (1.2 MB) - Page 9
Attaching Stabilizer Feet
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Attaching Stabilizer Feet CAUTION: If you are not using an optional printer stand, the four stabilizer feet must be attached to the drawer. 1 Carefully invert the 2000-sheet drawer so the bottom faces up. 2 Remove the screws securing the rubber feet to the drawer. Save the screws and rubber feet for use in step 5 on page 5. Note: If you later choose to use the drawer with the printer stand, you must remove the stabilizer feet and reattach the rubber feet. 2000-Sheet Drawer User's Guide 3
2000-Sheet Drawer User’s Guide
3
Attaching Stabilizer Feet
CAUTION:
If you are not using an optional printer stand,
the four stabilizer feet
must
be attached to the
drawer.
1
Carefully invert the 2000-sheet drawer so the bottom faces
up.
2
Remove the screws securing the rubber feet to the drawer.
Save the screws and rubber feet for use in step 5 on page
5.
Note:
If you later choose to use the drawer with the printer
stand, you must remove the stabilizer feet and re-
attach the rubber feet.