Lexmark T430 Technical Reference - Page 81

2-69 PCL Commands PCL emulation commands are multibyte strings (also known as "escape sequences") that begin with the Escape control code (ESC, ←, decimal 27, or hexadecimal 1B). The ESC control code notifies the printer that the characters that follow are to be interpreted as part of a command and are not control codes or data to be printed. Command Structure Most PCL emulation commands have the following structure: ESC & a # C Spaces have been added to this example for readability. The command parameter variables are indicated by a number sign (#). Table 2-20: Description of Command Structure Element ESC & a # C Description Decimal 27 or hex 1B Parameterized character from American National Standard Code for Information Interchange (ASCII) table (ranging from 33 to 47 decimal) Group character from ASCII table (ranging from 96 to 126 decimal) that specifies a group type of control Decimal character string value within specified numeric ranges; may be preceded by a + or - sign and contain a decimal point Termination character from ASCII table (ranging from 64 to 94 decimal) Command Parameters A command parameter sets the value for a command. This value stays constant until either a different value resets the command or a command resets the printer to the default values. For example, after the printer receives a command that selects a right margin beginning at column 63, the right margin of each printed page begins at column 63. That margin stays constant until a right margin command with a different value resets it or until the printer is reset. Parameters for each command are listed in the command tables beginning on page 2-71. Use the Symbol Set Tables to determine the decimal or hexadecimal value for each parameter. To determine a decimal or hex value, first locate the value of the parameter you require in the Symbol Set Table. The decimal value is the value shown in the bottom of the cell or box with that parameter. To find a hex value, go straight up