Lexmark X2450 User's Guide - Page 23
Load up to, Make sure, Notes
View all Lexmark X2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Load up to 25 sheets of labels 50 transparencies 100 sheets of custom-size paper Make sure • The print side of the labels faces you. • The top of the labels feeds into the printer first. • The adhesive on the labels does not extend to within 1 mm of the edge of the label. • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • The labels are loaded against the right side of the paper support. • The paper guide rests against the left edge of the labels. Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink smudging. • The rough side of the transparencies faces you. • If the transparencies have a removable strip, each strip faces away from you and down toward the printer. • The transparencies are loaded against the right side of the paper support. • The paper guide rests against the left edge of the transparencies. Notes: • Transparencies with paper backing sheets are not recommended. • Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. • The print side of the paper faces you. • The paper size fits within these dimensions: Width: - 76-216 mm - 3.0-8.5 inches Length: - 127-432 mm - 5.0-17.0 inches • The paper is loaded against the right side of the paper support. • The paper guide rests against the left edge of the paper. 23