Lexmark X652DE Forms and Bar Code Technical Reference

Lexmark X652DE - Mfp Taa Gov Compliant Manual

Get Lexmark X652DE - Mfp Taa Gov Compliant PDF manuals and user guides
UPC - 734646093835
View all Lexmark X652DE manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark X652DE manual content summary:

  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 1
    Forms and Bar Code Card Technical Reference Manual March 2009 www.lexmark.com
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 2
    of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 3
    Linotype-Hell AG and/or its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2009 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 4
    calculation 8 Visual Bar Code Designer 8 HP BarDIMM compatibility intercept 8 Supported Lexmark PCL5 & PostScript Bar Codes 8 Chapter 4: PCL5 emulation: HP 12 One-dimensional bar codes 12 Defining characteristics 12 Command structure considerations 12 Transparent print data command 13
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 5
    29 New PCL5 commands to support bar codes 29 Bar code descriptor ESC&x#W[descriptor data 29 Transfer bar code data ESC&y#W[bar code data 29 Compatibility safeguard 29 Lexmark symbology assignments 31 One-dimensional bar codes 32 Post 4-State bar code descriptors (Lexmark 32 USPS Facing
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 6
    94 Data types ...95 Data filters ...96 Forms Card font support 96 Bubble font 97 Determine printable characters 99 Printing errors 99 Forms files on printer directory 100 Appendix A: Feature Summary 101 Appendix B: Supported Bar Codes 104 Appendix C: Forms Card Fonts 128 Single-Byte Forms
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 7
    to all symbologies 149 String errors 149 Errors specific to symbologies 151 Appendix F: Deviations 153 Code 93 uppercase vs. lowercase 153 155 PDF417 Image Widths and Heights 155 MaxiCode Capacity 156 Bar Code Horizontal Alignment 157 PDF417 Capacity 157 MaxiCode Separators and Structured
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 8
    code options: - EAN Composite - RSS-14 Composite - UCC Composite - UPC Composite • Vertical text centering • Support for UTF-8 formset filename encoding • Enhanced page delimeters • Ability to fax and e-mail merged output from supported printers • Ability to use formsets stored on a USB flash drive
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 9
    a user-friendly bar code design graphical interface to easily generate PCL5 and PostScript data • SAP R/3 device types and associated installation instructions • Some demonstration and test files • A Readme file that includes download information, requirements, and installation instructions Follow
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 10
    Forms and Bar Code Card installed, there are two techniques to specify bar codes for printing in PCL5: 1 Using standard PCL5 font selection commands (used in the HP BarDIMM Pro products) 2 Using special Lexmark advanced PCL5 commands for bar codes Most of the bar code symbologies supported by the
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 11
    prior to printing the bar code. Checksum calculation Some bar code symbologies Code Card meets the function of the HP BarDIMM Pro version 3.3a option. Supported Lexmark PCL5 & PostScript Bar Codes The following is a list of supported one-dimensional bar codes: • Australian Post 4-state bar code
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 12
    5 with check digit • Industrial 2 of 5 • Industrial 2 of 5 with check digit • ISBN • ISBN+5 • ISSN • ISSN+2 • ISSN+5 • ITF-14 • Japan Post 4-state bar code • Matrix 2 of 5 • Matrix 2 of 5 with check digit • MSI Plessey • MSI Plessey + CHK10 • MSI Plessey + CHK10 + CHK10 • MSI Plessey + CHK11 + CHK10
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 13
    Tray label, 10-digit 2 of 5 • USPS Sack label, 8-digit 2 of 5 • USPS Zebra code • USPS FIM Face Identification Marking The following is a list of two-dimensional bar codes: • Codablock F • Data Matrix • MaxiCode • MicroPDF417 • PDF417 • QR Lexmark-Unique PCL5 Command Description Support of new bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 14
    to honor the HP versions of these commands and to ignore them in a bar code context. To avoid this conflict, use the PCL5 Lexmark enhancement switch. Setting or not setting this switch would allow a future Lexmark PCL5 emulation to decide which way to interpret the new escape sequences. The switch
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 15
    codes With the Forms and Bar Code Card installed, font selection commands in the incoming PCL5 data stream are analyzed for typeface characteristic values given in the table "PCL5 Function parameter list" on page 17. If the typeface value is one of those given, special bar code generation firmware
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 16
    value, you must explicitly specify the characteristic values. If no value is specified, the default value is used. Previously specified non-default values are not retained. • To print additional bar code data with the same characteristics as the previous data, set a new cursor position and send
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 17
    with the bar code. 0 = Use default value 1 = Do not print text 2 = Print text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print text above bar code Add the numbers listed below to produce the corresponding effect: 10 = 10 = 20 = 100 = Prints UPC-A checksum
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 18
    bar code symbologies) Letter Gothic Univers Univers Condensed CG-Times OCR-B Example: Esc(s304h24620T Selects EAN/JAN-8 with automatically sized, CG Times Bold text. Because the v, p, b and s parameters are not specified, their values default to: v p b1, s1 b2, s2 b3, s3 b4, s4 .7 inch Print text
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 19
    s and h parameters are not specified, their values default to: v .4 p Do not print text s1 .01 inch s2 .03 inch h Not applicable because of #p parameter value Selects space widths in dots (1/600 inch). Some bar codes, such as Interleaved 2 of 5 and Code 3 of 9, require only two values for
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 20
    of 5 Leitcode 72.0 124 10 30 - - N 13 Yes 1 For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 21
    (continued) Selects the bar code symbology. Default parameters 1 AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, #b4, s1 s2 s3 s4 24643 German Postal 2 of 5 Identcode 72.0 124 10 30 - - N 11 24644 USPS tray label, 10-digit 2 of 50.4* 4 9 27 - - N 10 5 24645 USPS sack label
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 22
    N 13 24812 RSS-14 stacked 13 1 1 For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 ( automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 23
    field byte 7 of the Lexmark bar code descriptor for Australia 4-State Postal bar codes (see the section "PCL5 emulation: Lexmark" on page 29 of this manual). Human-readable text is never printed with these bar codes. In relation to the fields of the Lexmark bar code descriptor for Australia 4-State
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 24
    default is 1, which is C table) Function parameters for Singapore Post 4-State bar code (HP compatibility mode, using typeface 24780) In relation to the fields of the Lexmark bar code of each successive bar is printed beginning one space width from and does not produce an error message. If an invalid
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 25
    positioned at the right end of the blank space when printing is complete. To generate a Zebra code, send consecutive slash ("/", ASCII value 47) or vertical one in a linear symbol for use on small items that will not be scanned at the point-of-sale. • RSS Expanded encodes EAN/UCC item identification
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 26
    scanned omnidirectionally. Note: The RSS Stacked Omnidirectional bar code is not supported by the Forms and Bar Code Card. Field Name Esc (s#T Type name Range n/a Default may use up too much memory. 8,16,24,32 (dec) or 8,10,18,20 (hex) Description Required. • 24810T specifies RSS-14 (standard)
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 27
    fit on the page. 8,16,24,32 (dec) or 8,10,18,20 (hex) 0=Default 1=No HRT 2=Embedded 3=Half-Embedded 4=Under 0 (dec) or 00 (dec) 4mm) - Stacked: 13 (4mm total height) - Limited: 10 (3mm) • Some of the Forms and Bar Code Card default V parameter values (in the above table) are slightly different
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 28
    Two-dimensional bar codes Bar code descriptor for Codablock F Field Name Esc (s#T Type name Range na Default (if not specified) n/a Esc (s#1,#2,[#3]V Int Min: 3 (dec) or 16 (dec) 03 (hex) or Max: No maximum 10 (hex) Int Min: 2 rows Max: 44 rows 2 (dec) or 02 (hex) Esc (s#1]B Int
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 29
    and B4 parameters are not used. The PCL S "Space" is not parsed or used by HP. Bar code descriptor for Data Matrix Field Name Esc (s#T Esc(s#1B Type name Range n/a Default (if not specified) n/a int Min: 10 (dec) Min. value is 1, but the or module will be too small to be readable. 0A
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 30
    and #2 will equal the size needed for the PDF 417 symbol. (default) 1 = Parameters #1 and #2 can be set parameter is not used to manually set rows and columns. 3 The default choice (0) sets the symbol Code Descriptor command to print PDF417 symbols. In relation to the fields of the Lexmark bar code
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 31
    Default 0 B parameter 10 Esc(s#B S parameter 0 Esc(s#S 24860T Model 1 24861T Model 2 Optional; determines ECC level as follows: • 0 = Default ECC level (error rules that exist for data sent using the Lexmark Transfer Bar Code Data command to print MaxiCode symbols, with the following change to rule
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 32
    HP-specific section is found immediately preceding this section. New PCL5 commands to support bar codes Support of new bar code functionality (for example, two-dimensional symbology PDF417) requires new Lexmark-unique PCL5 definitions that provide access to the new functionality. Two new commands
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 33
    18 82 B9 0B 01]ESC&y8W12345678 Two-dimensional PDF417: with ECC = 2, data = 12345678: ESC&x3W[00 01 02]ESC&y8W12345678 The general strategy for assigning new Lexmark symbology IDs and defining new Lexmark bar code descriptors is defined in the following table: Symbology ID 0-19 20-39 40-99 100-199
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 34
    code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code ID (hex) ID (dec) Symbology 00 01 1 PDF417 00 02 2 Maxicode 00 03 3 MicroPDF417 00 14 20 Australian Post 00 15 21 Singapore Post 00 16 22 UK Royal Mail 00 17 23 Japan Post 00
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 35
    One-dimensional bar codes Post 4-State bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar codes Byte Field name Range Default value Description 0-1 Symbology ID 00 14 (hex) Selects Australian post 4-State symbology 20 (dec) 2 Bar Width 28-3C (hex) 40-60 (
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 36
    Byte Field name Range Default value Description 3 Bar Pitch 14-18 (hex) 20-24 (dec) 16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height the tracker height 6-15 Reserved Note: The bar code data sent with Singapore Post will consist of either a 6-character or
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 37
    tracker height 6-15 Reserved Note: All seven code formats are supported. The format will be implied on the type of data received. Embedded 6a Default value 00 17(hex) 23 (dec) 64 (hex) 100 (dec) 0.6a 0.6a 1.2a 3.6a Description Selects Japan Post 4-State bar code symbology Sets overall bar code size.
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 38
    name Range Default value Description 8-15 Reserved Notes on Japan Post data: • Data will consist of a 7-digit postal code number, part of the block and house number information are encoded as data in the bar code. • Invalid characters or lengths in the postal code will be flagged with an error
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 39
    code, or foreign postcode will be flagged with an error. USPS Facing identification marking (FIM) Byte 0-1 2-15 Field name Symbology IDs Reserved Range Default value Description 00 ignored, and do not produce any error message. FIM symbols are printed according to the USPS specification. Bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 40
    00-04 (hex) 0-4 (dec) 9 - 10 Bar Width #1 (Module Width) 0.40-0.51 mm 11 - 12 Space Width #1 13 - 14 Bar Width #2 15 - 16 Space Width #2 17 - 18 Bar Width #3 19 - 20 Space Width #3 21 - 22 Bar Width #4 23 - 24 Space Width #4 25-31 Reserved Default value Description 00 -dimensional bar codes 37
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 41
    will be inserted automatically at the correct positions in the human-readable text printed with a Swiss Postal bar code symbol, separating the four components of the identification code. Invalid characters or lengths in the identification code will be flagged with an error. One-dimensional bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 42
    Default value 00 64 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) 0 (dec) 04 (hex) 00 4A (hex) 74 (dec) 02 (hex) 00 08 (hex) 8 (dec) 00 08 (hex) 8 (dec) 00 10 (hex) 16 (dec) 00 10 (hex) 16 (dec) 00 18 (hex) 24 (dec) 00 18 (hex) 24 (dec) 00 20 (hex) 32 (dec) 00 byte 8) One-dimensional bar codes 39
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 43
    text: 0 = Use default value 1 = Do not print 4 = Below symbol 5 = Above symbol Notes on ISBN, ISBN+5: ISBN bar codes are EAN-13 symbols that encode the first nine digits of an ISBN (the checksum digit is not encoded), prefaced by a special "Bookland" country code (978). The complete 10-digit ISBN
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 44
    Default value 00 65 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) 0 (dec) 04 (hex) 00 4A (hex) 74 (dec) 02 (hex) 00 08 (hex) 8 (dec) 00 08 (hex) 8 (dec) 00 10 (hex) 16 (dec) 00 10 (hex) 16 (dec) 00 18 (hex) 24 (dec) 00 18 (hex) 24 (dec) 00 20 (hex) 32 (dec) 00 byte 8) One-dimensional bar codes 41
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 45
    ISSN Text Location 26 - 31 Reserved Range 00-05 (hex) 0-5 (dec) Default value 05 (hex) 5 (dec) Description Specifies location of ISSN text: 0 = Use default value 1 = Do not print 4 = Below symbol 5 = Above symbol Notes on ISSN, ISSN+2, ISSN+5: ISSN bar codes are EAN-13 symbols that encode the
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 46
    (hex) Optional. Specifies the font style used for HRT. Note: Default font style for OCRB is Regular only. 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units • 0 or 2 (dec) or • 00 or 02 (hex) Optional. Specifies units for bar height dimensions. One-dimensional bar codes 43
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 47
    6-7 Bar Height 8 Bar/Space Width Units 9-10 Bar Width #1 (Code 128 bar 1, or Code 39 Narrow) 11-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range Default value Description 150-600 (dec) • 240 (dec) or • 00 F0 (hex) Optional. Corresponds to HP #v parameter
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 48
    hex) Specifies the font style used for HRT. Note: Default font style for OCRB is Regular only. int 0=default • 2 (dec) Optional. (1/600" units) or 1=1/ and set to the minimum value. The default BCE ITF-14 Bar Height is 1.25984 inches. If byte 5 is default 00 (600 dpi), then the Bar Height is
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 49
    the minimum and maximum values. The default bar code engine ITF-14 narrow bar width is 0.02 inches. If byte 5 is default 00 (600 dpi), then the Bar Width (Narrow) is 00 0C (hex) or 12 (dec). [int int] 12-24 (dec) or 00 0C-00 18 (hex) • 12 (dec) or • 00 0C (hex) Optional. Note: Values that
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 50
    minimum and maximum values. - - - These do not have to be specified. PLANET Codes Bytes 0-1 Field Name Type Symbology int int ID 2 Bar Pitch int Range n/a 20-24 (dec) Default (if not specified) • 128 (dec) or • 00 80 (hex) • 22 (dec) or • 16 (hex) Definition Required. Specifies PLANET
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 51
    240-12000 (dec) dimension dimension byte 1 (in byte 2 (in Units) units) Default (if not specified) Definition n/a Required. The two bytes with values 00 and 03 (hex) or 0 and 3 (dec) signify the symbology. All bar code descriptors must reserve the first two bytes for the symbology ID so the
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 52
    Bytes 6-7 8-9 10-15 MSB LSB Range Default (if not Columns: 1-4 (dec) • 0 (dec) Optional. or • 00 (hex) Manually set the number of symbol rows. Automatic operation specified by using 0001x) These two bytes signify the symbology. All bar code descriptors must reserve the first two bytes for the
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 53
    error code words 2 4 8 16 32 64 128 256 512 ECC can also be specified as a percentage. A valid non-zero ECC by Percentage will override ECC by Predetermined Value. See "ECC by percentage, bytes 1 and 2: (Default = 0000x)" on page . Rows: (Default = 00x) This can be used to manually set the number
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 54
    be built with 8 rows (80 codewords / 10 columns). Columns: (Default = 00x) This can be used to manually set the number of symbol columns. Both columns level 3 (16 error code words). For the same 20 data code words, and an ECC percentage specified at 35% (0023x), ECC level 2 (8 error code words) will
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 55
    (Default = 02x) This field designates what mode to use when interpreting the input data. Valid modes are (in hex):. Value 02x 03x 04x 05x 06x Description Structured carrier message with numeric postal code Structured carrier message with alphanumeric postal code Standard symbol with standard error
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 56
    code set A as defined in AIM spec). Codes longer than 6 characters will be truncated. Codes shorter than 6 characters will be padded with spaces. • The country code must be 3 digits in length and thus padded with leading zeros if necessary. • The class of service column and error correction codeword
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 57
    characters 32-126 and ASCII 9, 10 and 13. • Byte compaction code engine, depending on the input data. There is no method to explicitly specify any of the modes. The support of NULL (hex 00) characters is not supported at this time, due to possible issues with string termination within the printer
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 58
    8-9 10-15 MSB maximum values. To set the X dimension to default at 600 dpi requires a value of 9.45, 00 (hex) Optional. Manually set the number of symbol rows. Automatic operation specified by using 0. Manually set the number of symbol columns. Automatic operation specified by using 0. Bar code
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 59
    with linear- and area-CCD scanners, and with linear and rastering laser scanners. The following bar codes allow the addition of a two-dimensional composite component: 1 UPC-A (including +2 and +5 variants) An UPC-A bar code is divided into four areas: 1) The number system, 2) The manufacturer
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 60
    . d Check Digit: The check digit is an additional digit used to verify that a bar code has been scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify that the rest of the data in the bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 61
    no particular significance, thus, EAN-8 has absolutely no compatibility with UPC-E. An EAN-8 bar code is a 2- or 3-digit number system code followed by a 4- or 5-digit product code. The EAN-8 product codes are assigned directly by the numbering authority. This has the advantage that any company can
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 62
    : a Left-hand guard bars, or start sentinel, encoded as 101. b The second character of the number system code, encoded as described below. c The five characters of the manufacturer code, encoded as described below. d Center guard pattern, encoded as 01010. e The five characters of the product
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 63
    with which each of the characters in the left-hand side of the bar code will be encoded from the following table. 5 UCC-128 UCC-128 was before dates, batch numbers, quantities, weights and many other attributes needed by the user. Each AI tells the system what kind of data will follow and in what
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 64
    linear symbol that can be scanned omnidirectionally by suitably programmed point-of-sale scanners. It can also be printed in multiple rows as a user. The sequence stands for ESCape, or 1Bh. For example, this is a RSS-14 Composite bar code sequence: (s36b24810T01234567890123|Lexmark
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 65
    Corresponds to the HP #b parameter. module width default module range of the linear width of the linear component. component. The dimensions of the composite bar code may be varied in only two directions: • The module height of the linear component is varied using the V parameter. • The module
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 66
    dec) or 00 (hex) Optional. Corresponds to the HP #h parameter. Note: When the value given is not within the defined range, the value will be set to default (Courier). The dimensions of the composite bar code may be varied in only two directions: • The module height of the linear component is varied
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 67
    printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative (alternate escape code sequence of commands. The tilde character (~) is the default AEC. To set an AEC with a PCL5 sequence:
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 68
    FREESCAPE emulation, send the command: AEC**27J. To set an AEC from the printer control panel: 1 From the Forms Card menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Forms Card menu, select Alt ESC Code Char. 4 Select an AEC from the menu. You can disable the AEC by
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 69
    PostScript emulation This section describes additional PostScript emulation operators that are supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user specified parameters from within the PostScript data stream. This functionality is
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 70
    data is analyzed to determine if it is compressed or not, and if required, compression is automatically performed prior to printing the bar code. Checksum calculation Some bar code symbologies define checksum characters as a requirement of the data format. When this is the case, the Forms and Bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 71
    values for bars and spaces will also be the defaults, [8 16 24 32]. The /Special key defaults to false, so the checksum will be printed at the bottom left of the bar code. For the UPC-A symbology, the checksum character always prints when embedded text is specified, so /PrintCheckChar is irrelevant
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 72
    widths of 10, 20, 30 and 40, and spaces with widths of 9, 18, 27 and 36. It also specifies that the data is to be fully embedded within the code using the Courier-Bold font. For the EAN-8 symbology, the /Special key does not apply and the checksum character always prints when embedded
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 73
    [array] used by ISSN and ISBN only /FontName name Optional, see "Values for /FontName key" on page 75; default is Courier-Bold /Pitch [int] Optional, used only by PostNet5, PostNet9, and PostNet11 bar codes. Allowed values are 20 through 24. Values less than 20 result in a pitch of 20, values
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 74
    Key Type Definition /Special boolean Optional, UPC-A, default is false: • if false, prints checksum at bottom left of the bar code • if true, prints checksum at middle left of the bar code Code 3 of 9, default is false: • if false, does not print start/stop * characters with text • if true,
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 75
    /EAN-13 EAN/JAN-13 620 3 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens) 5 Except for the possibility
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 76
    1 6 12 18 24 N Yes mod10 check digits 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens) 5 Except for the
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 77
    420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 78
    Use symbology dependent default parameter, see "Values for / Symbology key" on page 72. Do not print text. Print text embedded. Print text half embedded. For ISBN and ISSN, this value is not allowed as the 2nd array element. Print text under bar code. Print text above bar code. Values for
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 79
    /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL5 section above for a complete description), but they have "extensions" known as ISSN+2, ISSN+5, and ISBN+5. Obtaining these
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 80
    code Key /Symbology /Bars Range 40-60 (dec) /Spaces 22-25 (dec) /TrackerHeight 100-160 (dec) /Ascender, 160-210 (dec) Descender Offset /FCC /Encoding /QuietZone /Units 11 (dec) 45 (dec) 59 (dec) 62 (dec) 0 for C table 1 for N table [int int] Default of bars that print per inch Sets
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 81
    Default value /RoyalMail 50 (dec) [integer] 22 (dec) [integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [array of integers] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print Overall size of bar code in decipoints (1/10 pt., optional) Sets
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 82
    Dutch post 4-state bar code Key /Symbology /Bars Range 38-63 (dec) /Spaces 20-24 (dec) /SyncBarHeight 102-152 (dec) /UpDnBarHeight 160-216 (dec) /QuietZone [int int] /Units Default value /DutchPostal 50 (dec) [integer] 22 (dec) [integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 83
    Key /QuietZone /Units Range [int int] Default value [150 150] [array of integers] Description Same as the other bar codes, in /Units (optional) 1/600 inch (optional) /BarHeight must be: • greater than or equal to 20 mm for module widths less than or equal to 0.45
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 84
    Two-dimensional bar codes HIBC 39/128 Key /Symbology Type name /Units /Height name int /Bars [int] /Spaces [int] /EmbedText name Range Default value Description n/a n/a Embedded /HalfEmbedded Optional. Defines if and where the HRT is to be printed. Two-dimensional bar codes 81
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 85
    printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error Width fields will be defaulted regardless if the values for Bar/Space Widths 2, 3 and 4 are valid
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 86
    of Bar Width 1, where, Min = 2.25 x Bar Width 1 Max = 3 x Bar Width 1 • [12] (dec) or • [00 0C] (hex) Note: The default value for Bar Width 2 is dependent on the value of Bar Width 1, where Default = 2.50 x Bar Width 1 Optional. Note: Values that go beyond the defined range will be appropriately
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 87
    Type name /FontName name /QuietZone [int int] PLANET Codes Key /Symbology Type name /Pitch int /QuietZone [int int] Range Default value Description /NoText /Under /Above /NoText Optional. Defines if and where the HRT is to be printed. See these sections: • Values for / EmbedText key
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 88
    /Rows integer /Columns integer /AspectRatio real /Units /ModuleWidth integer /Height integer Default Value Definition Required (/PDF417); signifies the bar code symbology Required; 0 for /Rows and /Columns set manually or 1 for /Rows and /Columns determined by /AspectRatio Required if /Type
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 89
    /ErrorLevel. See "/ Error Percent" on page 86. Optional; not supported Optional; not supported false Optional; default is false (no code words, and an /ErrorPercent of 35% (35), /ErrorLevel 2 will be selected, because it is closest to 20 x 0.35, or 7. This example will print a PDF417 bar code
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 90
    / width ratio is 1 / 2 %smallest element width in 600th units %smallest element width = 20/600ths %bar height = 40/600ths %number of error code words = 8 %because they are not specified, /Truncated defaults to %false (no ;truncation) and / QuietZone defaults to [150 150] Arguments for PDF417 bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 91
    Key /Symbology /Units Type name name /Model name /ECC /Mode name name /ModuleSize integer Default Value /600ths /Model2 /M /Mixed 10 Definition Required (/QR); determines bar code symbology Optional; values are /300ths, /600ths, /1200ths; may be used in the calculations below Optional
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 92
    an optional ANSI Message Header (e.g. [)>RS01GSyy) can be inserted prior to the postal code. (RS = record separator, ASCII 30; yy is a two-digit year). comma should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 93
    dimension to "default" at 600 DPI requires a value of 18.9, which is specified here as 1890 decimal. • 0 (dec) or • 00 (hex) • 0 (dec) or • 00 (hex) Optional. Automatic operation specified by using 0. Optional. Automatic operation specified by using 0. Arguments for MaxiCode bar code symbology 90
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 94
    to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200] (dec) • [150 150] (dec) or • [96 96] (hex) Optional. Note: Values less than the minimum will use the default value of [150 150]. Arguments for MaxiCode bar code
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 95
    component. default module height of the linear component. Sets the Y dimension of the linear bar code. The data in a Postscript bar code sequence codes, the sequence uses the "pipe" character "|" to extend the sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 96
    HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/ Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. The data in a Postscript bar code sequence is represented within
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 97
    is available only on MFPs that support e-mail and/or fax. 3 Select ports that the Forms Card listens to Users can now select which of the printer input ports that the Forms Card will listen to and perform merging on. This is accomplished through a new menu item called Print Port Setting: • If a port
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 98
    5 RFID Support Through LFJT (Lexmark Forms Job Ticket) support, the Forms Card now allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 99
    by utilizing a data filter to remove characters. See "Data filters" on page 96 below. Data filters The following information is a supplement to the Forms Menu information provided in the Forms and Bar Code Card User's Guide. If a data filter is enabled, the incoming forms job is run through
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 100
    "Forms Card Fonts" on page 128 identifies all supported/recognized fonts and the font file used by the Forms and Bar Code card. Bubble font This font is typically used for standardized testing forms that are optically read for grading purposes. It is available in Lexmark Forms Composer when the font
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 101
    Bubble font 98
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 102
    richer than that of the printer, a user could easily create a form where not all characters will print. This Technical Reference cannot define what is standard and non-standard, as those definitions change for each geographic location. The user stipulates a supported code page via the Forms Composer
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 103
    files on printer directory The Forms and Bar Code Card places forms files on the printer in the "formsmerge" directory. These files will be visible if the user performs a Print Directory from the printer menu. These files must not be tampered with in any way. Forms files on printer directory 100
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 104
    Greek/Cyrillic (code page 737) Y Y Y NA Greek, Cyrillic monospaced Custom UPR Y font Y NA OMR monospaced font Y Y Y NA Common Fonts/Metrics on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y 1 Supported when the printer control panel
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 105
    NA Honor Control Characters in Y Y Y NA Data PDF Version 1.3-1.6 1.3-1.6 1.6 NA Floating Subforms Y Y Y NA Error Page Control Printer Operator NA NA NA Panel Sel. Fax form output (MFP feature) Y NA Y NA E-mail form output (MFP Y NA Y NA feature) System variables in
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 106
    Y Designer v3.0 NA NA NA Alternate Escape Code (AEC) Y Human Readable Text Fonts • Courier Y Y Y • SM Unit Y Y Y • SM Unit Condensed Y Y Y • SM Gothic Y Y Y • Roman Y Y Y • OCR B Y Y Y • PLANET Y Y Y 1 Supported when the printer control panel is set to a DBCS
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 107
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 108
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 109
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 110
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 111
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 112
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 113
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 114
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 115
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 116
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 117
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 118
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 119
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 120
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 121
    Document Producer Lexmark Optra FormsTM Bar Code Name EAN/ code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 122
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 123
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 124
    Document Producer Lexmark Optra FormsTM Bar Code Name UPC-A code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 125
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 126
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 127
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 128
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 129
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 130
    and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 131
    C Forms Card Fonts Single-Byte Forms Card Fonts The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms card. Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 132
    Font name AntiqueOliveCE-Roman AntiqueOlive-Compact AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 133
    Font name AvantGardeCE-DemiOblique AvantGarde-Demi AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 134
    Font name CenturySchlbk Roman CenturySchlbk-Bold CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 135
    Font name CGOmega-BoldItalic CG-Omega-BoldItalic CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 136
    Font name Coronet-Regular Courier Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 137
    Font name Garamond (W1) Kursiv Garamond (W1) Kursiv Halbfett Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 138
    Font name Goudy-BoldItalic Goudy-ExtraBold Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 139
    Font name Helvetica-Condensed-Oblique Helvetica-Italic Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 140
    Font name Intl-Courier-Oblique Intl-Univers-Bold Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 141
    Font name LubalinGraphCE-BookOblique LubalinGraphCE-Demi LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 142
    Font name Optima-Italic Oxford Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 143
    Font name Tekton Times New Roman Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 144
    Font name Univers (WE) Univers (WE) Bold Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 145
    Font name UniversCE-Condensed UniversCE-CondensedBold UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 146
    Double-Byte Forms Card Fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 147
    to printer. Missing or corrupt file download formsets again. Missing or corrupt file download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User or internal error Forms Print Errors 144
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 148
    Add memory to printer. Add memory to printer. Add memory to printer. User or internal error Download formsets. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Missing or corrupt file download formsets again. Forms Print Errors 145
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 149
    Unable to open LFF file %s Error Type Solution Insufficient memory Add memory to printer. Insufficient memory Add memory to printer. Internal Error Contact Lexmark Service. Internal Error Contact Lexmark Service. PJC File Missing or corrupt file download formsets again. PJC File Missing
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 150
    XML file missing required element: %s Error Type LFM File Insufficient memory XML Error XML Error Solution Missing or corrupt file download formsets again. Add memory to printer. Possible corrupt file download formsets again. Possible corrupt file download formsets again. Forms Print Errors 147
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 151
    Errors Common error messages If an error occurs during a bar code operation, an error described in the following pages will be printed. The error is printed in the following format: !Err: nn Printed Error Example: !ERR: 12 Invalid Character PostScript error messages To assist with troubleshooting
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 152
    common to all symbologies Error Code 1 2 3 4 5 6 7 8 9 10 11 18 19 Error Description Unexpected Error NULL data Invalid structure No active bar codes Structure out of range Parameter buffer NULL Parameter buffer too small Parameters not saved Unknown bar code Type Unknown bar code ID Unknown bar
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 153
    MicroPDF417 X MSI Plessey X X X OMR X X PDF-417 X PLANET X X QR Code X X X RSS14 X X X Singapore Post X X Swiss Postal X X UCC-128 X X British Royal Mail X X X UPC-A/E X X X USPS ZIP X X USPS FIM X X USPS Sack X X Note: Bar Code errors shown in red are
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 154
    Where flag 46 HIBC Invalid What flag 47 HIBC Invalid Date/Time 48 HIBC Invalid Format 49 HIBC Product/Catalog number too long Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 155
    Invalid encoding string 57 MaxiCode Encoding string too long 58 MSI Plessey Invalid checksum 10 60 MicroPDF Too few columns 61 MicroPDF Too many columns 62 MicroPDF Too few rows 63 MicroPDF Too many rows Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 156
    considers as an error. The LXK BCC also performs the exact same way as the HP BDP. The BCE does not support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specs at the URLs noted above. Therefore, the Forms and Bar Code Card firmware must convert any
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 157
    does not support lowercase "a-z" start and stop character input, does not translate to uppercase, and will throw a "Error 12 - Invalid Character" error. The BCE is operating per the specs noted above, and does not translate lowercase to uppercase. Therefore, the Forms and Bar Code Card firmware must
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 158
    image sizes with previous Lexmark bar code options is not assured. However, the proper order and placement of the bars and spaces is the same, and the bar code will also scan correctly. If the bar code image is too wide and will not fit within the available space, users should either resize their
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 159
    data. Note: Exact size compatibility of certain PDF417 bar code images with previous Lexmark bar code options is not assured. However, the bar code will still scan correctly. If the bar code image does not fit within the available space, users should either resize their form to allow placement of
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 160
    by firmware before the BCE is called. The remaining maximum data should be safely submitted to the BCE to be rendered. This will require extra checking code to be added before the BCE, to truncate any excess data. However, this procedure will prevent the BCE from throwing errors on pages with
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 161
    Code Technical Reference manual ver 2.4b, and the HP BarDIMM Technical Reference manual code readers that can decode such a combined bar code series. The SuchyMIPS BCE does support HP spec BarDIMM the input data, the BCE will throw an error. Users should add additional parsing that examines input data
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 162
    57 00 02 This command includes: a Esc & x 3 W (block bar code PCL other separator characters should produce an error on the page. 3 MaxiCode Separator Change (add Code Card should print a valid MaxiCode symbol that is empty (no data). Depending on the scanner used, it may not produce a valid scan
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 163
    characters, if users attempt to encode a Codabar bar code with non-numeric characters, then the !Err: 12 Invalid Character error message is too Short error message is generated. Postcript barcodepath Operator The Postscript operator barcodepath does not work as on previous Lexmark Bar Code options.
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 164
    Forms Manager will result in one of two scenarios: • If the printer's Print PS Error setting is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the printer's Print PS Error setting is turned off, then the job will be flushed and
  • Lexmark X652DE | Forms and Bar Code Technical Reference - Page 165
    www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
www.lexmark.com
March 2009
Forms and Bar Code Card
Technical Reference Manual