Lexmark X652DE Forms and Bar Code Technical Reference - Page 93
MicroPDF 417, set the X dimension to default at 600 DPI
UPC - 734646093835
View all Lexmark X652DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
MicroPDF 417 Key /Symbology Type name /Units name /ModuleWidth int /ModuleHeight int /Rows int /Columns int Range n/a /300ths /600ths /1200ths 240-12000 (dec) 48060000 (dec) Note: The range of Y dimension is dependent on the value of X dimension, such that, Min = 2 * Xdimension Max = 5 * Xdimension Note: 4-44 (dec) 1-4 (dec) Default value Description n/a Required. /MicroPDF417 /600ths Optional. /Units is used for /ModuleWidth and /ModuleHeight calculations below. • 945 (dec) Optional. or Note: Values that go beyond the defined • 03 B1 (hex) range will be appropriately clipped and set to the minimum and maximum values. Sets the X dimension of the module (white or black rectangle) in 100th of an inch. To set the X dimension to "default" at 600 DPI requires a value of 9.45, which is specified here as 945, or 945 decimal. • 1890 (dec) or • 07 62 (hex) Optional. Note: Values that go beyond the defined range will be appropriately clipped and set to the minimum and maximum values. Sets the Y dimension of the module (white or black rectangle) in 100th of an inch. To set the Y dimension to "default" at 600 DPI requires a value of 18.9, which is specified here as 1890 decimal. • 0 (dec) or • 00 (hex) • 0 (dec) or • 00 (hex) Optional. Automatic operation specified by using 0. Optional. Automatic operation specified by using 0. Arguments for MaxiCode bar code symbology 90