Lexmark X925 PRESCRIBE Emulation Technical Reference Guide - Page 18

Proprinter and Line Printer environments are supported, but native Proprinter commands are not supported. SEM 0 = Line Printer SEM 1 = IBM Proprinter X-24E SEM 2 = Diablo 630 SEM 5 = Epson LQ-850 SEM 6 = HP LaserJet III PCL 5e SEM 7 = HP 7475A (Plotter) In Kyocera printers, the FRPO P1 parameter is used to select the printer default emulation when the printer is first turned on. A particular page of a print job can be a mixture of the selected emulation data stream and PRESCRIBE. Notes: • The PRESCRIBE emulation option only supports PCL 5e, although the PRESCRIBE print environment may be initialized for Proprinter or Line Printer by using the SEM or FRPO commands. For more information, see "P1: Default emulation" on page 14. • PCL 5e emulation for the PRESCRIBE emulation option is designed to be compatible with HP PCL 5e, not necessarily the Kyocera PCL 5e implementation. SFA: Set bitmap Font Attributes The supported executable parameters of this command include: hmi, vmi, and spacing type. The nonexecutable parameters (rotation, symbol set, height, italic, weight, typeface, and font type) are not supported. The nonexecutable parameters may affect best-fit font selections, and could result in the PRESCRIBE emulation option selecting a different font than Kyocera. SIMG: Set IMaGe model This command controls the transparency and opaqueness of images and patterns. Six different operating modes are defined. The PRESCRIBE emulation option supports modes 3, 4, 5, and 6. Modes 1 and 2 are not supported. STAT: STATus This command can verify if the PRESCRIBE emulation option is properly installed to match the Kyocera setup of the account. The STAT page only displays the FRPO settings that are supported by the PRESCRIBE emulation option. To print a STAT page, send this: !R! STAT; EXIT; A STAT page is also printed when a Menu Settings test page is printed. PRESCRIBE commands 18