Lexmark XC4342 Paper and Specialty Media Guide - Page 41

Printer-specific paper support 41 Paper sizes supported by the finishers Paper size Staple finisher Staple, hole punch finisher Stack Offset Staple Stack Offset Staple Hole punch A31 297 x 420 mm (11.69 x 16.54 in.) A4 210 x 297 mm (8.27 x 11.7 in.) A5 148 x 210 mm (5.83 x 8.27 in.) X 2 2 2 6 A6 105 x 148 mm (4.13 x 5.83 in.) X X X X X Banner X X 1 Maximum width: 215.9 mm (8.5 in.) Maximum length: 1320.8 mm (52 in.) X X X 1 Executive 2 2 2 184.2 x 266.7 mm (7.25 x 10.5 in.) 2 2 2 Folio1 215.9 x 330.2 mm (8.5 x 13 in.) Hagaki 100 x 148 mm (3.94 x 5.83 in.) X X X X X 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 4 Supports paper sizes ranging from 190 x 139.7 mm (7.48 x 5.5 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 5 Supports paper sizes ranging from 202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 6 Supports only up to 2‑hole punching. 7 Supports only up to 2‑hole punching when loaded in short‑edge orientation. 8 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52 in.). 9 Supports paper sizes ranging from 209.97 x 148 mm (8.27 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).