Lexmark XC8163 .Users Guide PDF - Page 80
Device Operations, Toner patch sensor setup, Scanner Configuration, Enable Optional Parallel Port
View all Lexmark XC8163 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Understanding the printer menus 80 Menu item Description Device Operations Automatically Display Error Screens Off On* Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting. Device Operations Honor orientation on fast path copy Off* On Enable the printer to use the orientation setting under the Copy menu when sending quick copy jobs. Device Operations Automatic Media Type Detection Off On* Set the printer to detect the paper type of a page being loaded. Device Operations Enable Optional Parallel Port Off* On Enable the optional parallel port. Toner patch sensor setup Calibration frequency preference Disabled Fewest color adjustments Fewer color adjustments Normal* Better color accuracy Best color accuracy Set the printer to put down the correct amount of toner to maintain color consistency. Toner patch sensor setup Full calibration Run the full color calibration. Toner patch sensor setup Print TPS information page Print a diagnostic page that contains information on toner patch sensor calibration. Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Note: An asterisk (*) next to a value indicates the factory default setting.