Lexmark XC9455 Users Guide - Page 199
Adjusting the fax darkness, Printing a fax log, Blocking junk faxes, Holding faxes, Forwarding a fax
View all Lexmark XC9455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Fax 199 Adjusting the fax darkness Note: Make sure that fax is configured. For more information, see the Setting up the printer to fax section. 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, touch Fax, and then enter the needed information. 3 Touch Darkness, and then adjust the setting. 4 Send the fax. Printing a fax log Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Reports > Fax. 2 Touch Fax Job Log or Fax Call Log. Blocking junk faxes Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls. 2 Set Block No Name Fax to On. Holding faxes Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes. 2 Select a mode. Forwarding a fax Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the printer to fax section. 1 Create a destination shortcut. a Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.